2.5 inch floor deck machine 1025 composite flooring deck floor roll forming machine with hydraulic pre cutter

Key words:

1025 floor bearing plate commonly used in America and South Ameri

deck floor roll forming machine

floor decking sheet roll forming machine

roll forming machine for making deck floor panels

Product category:

1025 floor plate commonly used in the United

Tel/Whatsapp:

+86 13231741939

Product Video

Contact immediately

2.5 inch floor deck machine 1025 composite flooring deck floor roll forming machine with hydraulic pre cutter

1025 mm Decking Floor Panel Roll Forming Machine

This is the decking floor roll forming machine loading video. The machine was equipped with one 5 tons hydraulic decoiler with coil car for automatic feed coils. Which will safe and save staff cost . The machine can do decking floors maximum thickness up to 1.27mm , and galvanized steel . 1250 mm feeding width to do 1025mm effective width decking floor panels. Other sizes support customization.

Profile Drawing

Machine Parameters

No	Item	Parameter	Note
1	Raw material	Galvanized steel	Meet your requirement
2	Thickness	22 gauge to 18 gauge (0.8-1.27mm)	Meet your requirement
3	Feeding width/coil width	49.21inches(1250mm)	Same with profile sample
4	Useful width	40.35inches(1025mm)	Same with profile sample
5	Side stands’ thickness	20mm	Exported standard which has enough thickness to support the machine shafts and rollers which is better then that 20mm or 16mm thick machine stands
6	Forming Speed	8-15m/min	About 1200m/h; About 4.7 tons coils/h
7	Forming station	24stations	Your G550 material decided that 30 and 27 forming stations can do better profiles.
8	Total Power	2*11kw (main motor power)+5.5KW(hydraulic pump station motor power)	27.5 KW.h total enough. Hydraulic pump station with cooling fan.
9	Mill bed material	400H beams welded ,10mm standard H beams’ thick	400 height H beams was stronger than 350 height H beams.We use the best enough material to you dear.
10	Voltage	480 V 60HZ 3 phases	Meet your requirement
11	Diameter of shaft	90mm diameter solid shafts	Meet your requirement
12	Cutting type	Automatic 4-pillar guide Shear,	Export standard, beautiful, good stability
13	Forming Shaft	45# steel with grinding process	Exported standard
14	Forming Roller	45# steel with hard chrome coating	high precision and good quality. High hardness.
15	Cutting Blade	Cr12 with hard treatment	Exported standard which shear life exceeds 1 million times.
16	Chain size	2 inches	Exported standard
17	PLC/Touch Screen	DELTA brands	From TaiWan,China , high quality and stability
18	Electrical motor	SHANGHAI TOP BRAND	Top brand , quality tested ,high quality and stability
19	Encoder	OMRON Brand with aluminum bracket	From Japan,high quality and stability
20	Low-voltage electrical	SCHNEIDER Brands	From France,high quality and stability
21	Machine rough size	L15mW1.45mH1.7m	When machine finished , then can have accurate machine size
22	Machine rough weight	12 tons	When machine finished , then can have accurate machine weight
23	Machine with legs	Have	Can lift machine height

Spare Part

No.	Name	Quantity	Country
1	Rely	2pcs	China
2	Encoder	2pcs	China
3	Encoder wheels	2pcs	China
4	bearings	2pcs	China
5	limit switch	2pcs	China
6	Switch buttons	3pcs	China
7	sensor	4pcs	China
8	Oil tubes	2pcs	China
9	Gears	2pcs	China
11	circlip	30pcs	China
12	Tool Box	1 Set	China