-
About UsOur company is a professional high-end cold roll forming equipment manufacturer integrating independent research and development, production, sales and service. It has a complete machine parts production, processing, painting, assembly and finished product testing area.
-
ProductsThe company currently covers an area of 10,000 square meters and has a total of more than 40 employees. A journey of a thousand miles begins with professionalism, corporate brand, and strength. We are demanding of every detail and have been working hard to become the most perfect quality shaper.
-
SupportThe sufficient spare parts in the warehouse ensure the delivery time of the machine. The company has passed CE certification and ISO quality system certification and has a complete and scientific quality management system.
-
BlogSeveral senior design engineers and good processing technology as well as dozens of long-term stable assembly department employees ensure the quality and performance of the equipment. Sufficient spare parts in the warehouse ensure the delivery time of the machine.
50 X 50 steel racks storage shelf roll forming machine with 63 tons YANG LI punch
Key words:
Product category:
Tel/Whatsapp:
50 X 50 steel racks storage shelf roll forming machine with 63 tons YANG LI punch
Metal Upright Storage Rack Column Roll Forming Machine Introduction
Upright Storage Rack Column Machine Introduction
YX50-50 shell column forming machine is a shell column equipment used to product one of the shell series components. The finished product is "shell column". "Shelf columns" are mostly used as one of the light shell components in warehouses, supermarkets and large and all shopping malls for cargo display, display, and product display. The machine we produce adopts one 2 in 1 decoiler and leveling unit and equipped with one famous YANGLI punch and adopts flying cut so that can let machine keeps faster speed even has punching , which greatly improves the production efficiency of customers. The machine price is decided to your profile width sizes ,height sizes and thickness . Welcome to show us your needed profile drawing so that we can quote you one suitable machine price.
Machine Schematic
|
NO. |
Description |
Quantity (set) |
|
1 |
1.5 T/2.5T/3T...customized(manual/hydraulic/electric) decoiler and leveling device |
1 |
| 2 | YANGLI Brand punch machine with servo feeder | 1 |
|
3 |
Feeding Platform |
1 |
|
4 |
Forming system |
1 |
|
5 |
Transmission system |
1 |
|
6 |
Automatic Hydraulic Cut |
1 |
|
7 |
Run-out table |
1 |
|
8 |
Hydraulic pump station |
1 |
|
9 |
Electric Control Cabinet |
1 |
|
10 |
Spare parts and tools |
1 |
Machine Decoiler
1.Power: unpowered
2.Range of segment expansion: 480 ~ 520mm
3. Coil bearign weight: 3tons
Leveling Machine : 2.2 kw
 |
Punching Machine And Servo Feeder : 63 tons punching and NCF 300 servo feeder ,3kw power
Machine Feeding Platform
Machine base frame material:
Whole steel plate welded about the surface which will be made by CNC machine and surface will have good flatness and looks bright and beautiful.(pay attention: the machine base frame was not welded by square tubes).
Machine forming Station:
14 stations according to your profiles. (pay attention: this is the best suitable forming stations, neither more nor less about the forming stations).
Rollers material:
Cr12 material with turning+quenching(hardness 58-62degrees)+grinding+fine turning treatment which has good quality and this type of processing can guarantee the rollers' hardness meet international standard HRC 58-62 degrees and has good were resistance.(pay attention: the roller material neither made of 45# steels nor bearing steels).
Machine stands (can also choose cast iron machine stands) :
Wrought iron welding, 40 mm thick which can have good stable , high procession and will not be deformed when machine running.
Shaft diameter:
60mm diameter solid shafts (pay attention: the shafts are solid and the shaft diameter is 60mm, not 50mm).
Power:
main motor power: 15kw
hydraulic cutting motor power: 7.5kw
Non-stop servo tracking motor power:2.3kw
(pay attention: We can guarantee your machine has enough power to make the machine running stable . )
Transmission way :
Gears which has the best stable performance. (pay attention: the machine is not chain transmission )
Machine run out table : 3m long
Voltage:
customized (pay attention : If your voltage is special ( not 380V , 50HZ, 3 phases , we all called special voltage) which means the all motors of the machine need to be customized according to your voltage.So that this part will add some motor customized costs).
Machine Speed: whole line can reach total 10-15m/min speed including punching and cutting
|
No |
Item |
Parameter |
|
1 |
Raw Material |
Stainless steel /GI/Aluminum/PPGI , Q235 , 1.5mm customized....... |
|
1 |
Decoiler |
1. Feeding method: passive feeding 2. Rolling method: manual tightening 3. Suitable coil inner diameter: φ508mm 4. Suitable coil outer diameter:<φ1400mm 5. Load: 1.5/2.5/3/5...customized tons |
|
2 |
Profile Size |
customized |
|
3 |
Side stands’ thickness |
30mm /40mm cast iron ..customized |
|
4 |
Forming Speed |
15m /25m/30m/45m/min.... customized |
|
5 |
Forming station |
12/14 ..customized |
|
6 |
Total Power |
15 kw (Kserious main motor power) + 7.5 KW(hydraulic pump station motor power)+2.3kw servo tracking motor customized......... as profile sizes and thickness and material |
|
7 |
Mill bed material |
whole iron plates / 150*150 square tubes welded H beam/ ....customized .. |
|
8 |
Voltage |
380 V 50HZ 3 phases 220V /415V/ 480V ....customized |
|
9 |
Diameter of shaft |
50mm / 60mm diameter solid shafts customized as profile sizes and thickness and material |
|
10 |
Cutting type |
Automatic shear |
|
11 |
Forming Shaft |
Material : 45# steel. Processing technology: quenching and tempering treatment HB210-230 + lathe rough turning + CNC lathe fine turning shape + milling machine processing keyway and round nut stop groove. |
|
12 |
Forming Roller |
Material: Cr12 steel, processing technology: fine turning + wire cutting keyway + surface polishing and hard chrome plating. |
|
13 |
Cutting Blade |
Material : Cr12 processing technology: rough material milling machine processing - vacuum heat treatment HRC58-60 - flat grinding processing end face - wire cutting processing outline - engraving machine fine carving shape. |
|
14 |
transmission |
gears/ gearboxes customized as client needed |
|
15 |
Run Out table Length |
3m |
|
16 |
PLC Brand |
DELTA/XINJIE Brand |
|
17 |
Touch Screen Brand（HMI） |
DELTA/XINJIE Brand |
|
18 |
Frequency Brand |
DELTA/XINJIE Brand |
|
20 |
Electrical motor |
Top brand , quality tested, stable Performance. |
|
21 |
Encoder |
OMRON Brand with aluminum bracket |
|
22 |
Low-voltage electrical |
Top brand , quality tested, stable Performance. |
|
23 |
Machine rough size |
L 6m * W 0.8m * 1.7m |
|
24 |
Machine rough weight |
2500 KGS |
|
25 |
Machine with anchor bolts |
can level the machine on the ground |
Spare Part
|
No. |
Name |
Quantity |
Country |
|
1 |
Encoder |
1pcs |
China |
|
2 |
Encoder wheels |
2pcs |
China |
|
3 |
bearings |
2pcs |
China |
|
4 |
sensors |
2pcs |
China |
|
5 |
Oil tubes |
2pcs |
China |
|
6 |
nuts |
5pcs |
China |
|
7 |
Tool Box |
1 Set |
China |
Recommend Products
Product Consulting
Address: 50 Meters South Of China Petroleum Gas’
Tel/Whatsapp: +86 13231741939
E-mail: sales@czdingtuorollformer.com
E-mail: formingmachine55@gmail.com
Message consultation
WhatsApp / Wechat